VDE reg. no. 7030 for the following sizes:up to 2.5 mm²: 2 - 65 coresfrom 4 mm²: 2 - 7 coresfrom 25 mm²: 2 - 5 cores
Extended Description
Benefits
Wide choice of standardized lengths and individual cuts
Very broad range, items with up to 100 conductors
Applications
For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
Dry or damp rooms that are subject to medium mechanical loads
Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors
Features
Flame-retardant according IEC 60332-1-2
Good chemical resistance, see catalogue appendix T1
Oil-resistant according to DIN EN 50290-2-22 (TM54)
Product make up
Fine-wire strand made of bare copper wires
PVC insulation LAPP P8/1
Cores twisted in layers
PVC outer sheath, grey (similar RAL 7001)
Manufacturer
Lapp
Chemical resistant
Yes
Power Chain
Yes
Number of conductors
36
mm2 per conductor
1.0
Protective Conductor
Yes
Outer Diameter (mm)
17.4
Copper index kg per km
346.0000
Benefits
Wide choice of standardized lengths and individual cuts
Very broad range, items with up to 100 conductors
Technical Data
Core identification code
Black with white numbers acc. to VDE 0293-334
Conductor stranding
Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5