8300 Series Switch-Mode Amplifiers


AE Techron’s 8300 Series provides a unique combination of the advantages of switch-mode and linear amplifiers. Switch-mode efficiency is combined with a low noise floor and THD, while also benefitting from high slew rates and wide bandwidth. The 8300 Series is also able to safely drive both reactive and resistive loads of varying impedances with no loss in rated output power.
8302 - 2 kW (up to 50 kVA), up to 425A continuous, Single-Phase
8302 amplifiers are 200Vp, low-noise, DC-to-50-kHz switch-mode amplifiers. They are fast enough for DC automotive dropout testing and capable of AC voltages required for ISO 61000 and Aviation testing. Plus, they have low enough noise and distortion specifications to be the reference power source in power quality measurements. 1.1 Features Wide Bandwidth and Flexible The 8302 amplifier is capable of reproducing AC, DC and AC+DC waveforms into loads from a dead short to high impedance. It can be used to simulate a battery at 13.5 VDC or be an AC source with a L-N potential of up to 140 VAC. Rated current, for a given voltage, is available for all waveform types (AC, DC or AC+DC) at frequencies from DC to 50 kHz. Voltages from 0 to 140 VRMS are available with no changes in configuration.
The 8302 excels when it comes to driving reactive loads. As frequencies increase, the effective impedance of the load becomes a much larger part of the total load to be driven (especially with inductive loads like coils). However, when driving reactive loads, the 8302 is capable of receiving, reprocessing and returning to the load up to 5X its rated power. The result is a bench top system capable of 10 kVA+ output while drawing less than 2 kW of AC mains power.


Key Performance Capabilities
- Bandwidth: DC to 50 kHz
- Voltage: 0 to 140 VRMS; 0 to 200 VDC
- Slew rate: Up to 60 V/µs
- Current: Up to 65 ARMS*
- Distortion: <0.2%
- Power: 2 kW*
- Power levels up to 5X rated power when driving reactive loads
- High power efficiency and density
*Models available with output power from 2 kW to 10 kW (capable of up to 50 kVA).
8304 - 4 kW (up to 50 kVA), up to 425A continuous, Three-Phase
8304 amplifiers are 200Vp, low-noise, DC-to-50-kHz switch-mode amplifiers. They are fast enough for DC automotive dropout testing and capable of AC voltages required for ISO 61000 and Aviation testing. Plus, they have low enough noise and distortion specifications to be the reference power source in power quality measurements. 1.1 Features Wide Bandwidth and Flexible The 8304 amplifier is capable of reproducing AC, DC and AC+DC waveforms into loads from a dead short to high impedance. It can be used to simulate a battery at 13.5 VDC or be an AC source with a L-N potential of up to 140 VAC. Rated current, for a given voltage, is available for all waveform types (AC, DC or AC+DC) at frequencies from DC to 50 kHz. Voltages from 0 to 140 VRMS are available with no changes in configuration.
The 8304 excels when it comes to driving reactive loads. As frequencies increase, the effective impedance of the load becomes a much larger part of the total load to be driven (especially with inductive loads like coils). However, when driving reactive loads, the 8304 is capable of receiving, reprocessing and returning to the load up to 5X its rated power. The result is a bench top system capable of 10 kVA+ output while drawing less than 4 kW of AC mains power.


Key Performance Capabilities
- Bandwidth: DC to 50 kHz
- Voltage: 0 to 140 VRMS; 0 to 200 VDC
- Slew rate: Up to 60 V/µs
- Current: Up to 115 ARMS*
- Distortion: <0.2%
- Power: 4 kW*
- Power levels up to 5X rated power when driving reactive loads
- High power efficiency and density
*Models available with output power from 2 kW to 10 kW (capable of up to 50 kVA).
8306 - 6 kW (up to 50 kVA), up to 425A continuous, Three-Phase
8306 amplifiers are 200Vp, low-noise, DC-to-50-kHz switch-mode amplifiers. They are fast enough for DC automotive dropout testing and capable of AC voltages required for ISO 61000 and Aviation testing. Plus, they have low enough noise and distortion specifications to be the reference power source in power quality measurements. 1.1 Features Wide Bandwidth and Flexible The 8306 amplifier is capable of reproducing AC, DC and AC+DC waveforms into loads from a dead short to high impedance. It can be used to simulate a battery at 13.5 VDC or be an AC source with a L-N potential of up to 140 VAC. Rated current, for a given voltage, is available for all waveform types (AC, DC or AC+DC) at frequencies from DC to 50 kHz. Voltages from 0 to 140 VRMS are available with no changes in configuration.
The 8306 excels when it comes to driving reactive loads. As frequencies increase, the effective impedance of the load becomes a much larger part of the total load to be driven (especially with inductive loads like coils). However, when driving reactive loads, the 8306 is capable of receiving, reprocessing and returning to the load up to 5X its rated power. The result is a bench top system capable of 10 kVA+ output while drawing less than 6 kW of AC mains power.


Key Performance Capabilities
- Bandwidth: DC to 50 kHz
- Voltage: 0 to 140 VRMS; 0 to 200 VDC
- Slew rate: Up to 60 V/µs
- Current: Up to 175 ARMS*
- Distortion: <0.2%
- Power: 6 kW*
- Power levels up to 5X rated power when driving reactive loads
- High power efficiency and density
*Models available with output power from 2 kW to 10 kW (capable of up to 50 kVA).
8308 - 8 kW (up to 50 kVA), up to 425A continuous, Three-Phase
8308 amplifiers are 200Vp, low-noise, DC-to-50-kHz switch-mode amplifiers. They are fast enough for DC automotive dropout testing and capable of AC voltages required for ISO 61000 and Aviation testing. Plus, they have low enough noise and distortion specifications to be the reference power source in power quality measurements. 1.1 Features Wide Bandwidth and Flexible The 8308 amplifier is capable of reproducing AC, DC and AC+DC waveforms into loads from a dead short to high impedance. It can be used to simulate a battery at 13.5 VDC or be an AC source with a L-N potential of up to 140 VAC. Rated current, for a given voltage, is available for all waveform types (AC, DC or AC+DC) at frequencies from DC to 50 kHz. Voltages from 0 to 140 VRMS are available with no changes in configuration.
The 8308 excels when it comes to driving reactive loads. As frequencies increase, the effective impedance of the load becomes a much larger part of the total load to be driven (especially with inductive loads like coils). However, when driving reactive loads, the 8308 is capable of receiving, reprocessing and returning to the load up to 5X its rated power. The result is a bench top system capable of 10 kVA+ output while drawing less than 8 kW of AC mains power.


Key Performance Capabilities
- Bandwidth: DC to 50 kHz
- Voltage: 0 to 140 VRMS; 0 to 200 VDC
- Slew rate: Up to 60 V/µs
- Current: Up to 240 ARMS*
- Distortion: <0.2%
- Power: 8 kW*
- Power levels up to 5X rated power when driving reactive loads
- High power efficiency and density
*Models available with output power from 2 kW to 10 kW (capable of up to 50 kVA).
8310 - 10 kW (up to 50 kVA), up to 425A continuous, Three-Phase
8310 amplifiers are 200Vp, low-noise, DC-to-50-kHz switch-mode amplifiers. They are fast enough for DC automotive dropout testing and capable of AC voltages required for ISO 61000 and Aviation testing. Plus, they have low enough noise and distortion specifications to be the reference power source in power quality measurements. 1.1 Features Wide Bandwidth and Flexible The 8310 amplifier is capable of reproducing AC, DC and AC+DC waveforms into loads from a dead short to high impedance. It can be used to simulate a battery at 13.5 VDC or be an AC source with a L-N potential of up to 140 VAC. Rated current, for a given voltage, is available for all waveform types (AC, DC or AC+DC) at frequencies from DC to 50 kHz. Voltages from 0 to 140 VRMS are available with no changes in configuration.
The 8310 excels when it comes to driving reactive loads. As frequencies increase, the effective impedance of the load becomes a much larger part of the total load to be driven (especially with inductive loads like coils). However, when driving reactive loads, the 8310 is capable of receiving, reprocessing and returning to the load up to 5X its rated power. The result is a bench top system capable of 10 kVA+ output while drawing less than 10 kW of AC mains power.


Key Performance Capabilities
- Bandwidth: DC to 50 kHz
- Voltage: 0 to 140 VRMS; 0 to 200 VDC
- Slew rate: Up to 60 V/µs
- Current: Up to 300 ARMS*
- Distortion: <0.2%
- Power: 10 kW*
- Power levels up to 5X rated power when driving reactive loads
- High power efficiency and density
*Models available with output power from 2 kW to 10 kW (capable of up to 50 kVA).