ANZ14
ANZ14
Meinberg
LED Display with DCF77 Radio Clock Option (ANZ14/DCF77)
The 14-digit LE-Display shows the time, date and day-of-week. The displays brightness is adjustable via the menu. RS232 or 20mA-interface, unlimited series connection possible, with buffered hardware clock and integrated power supply unit.
The Network option ANZ14/NET: can act as a slave clock for Meinberg LANTIME NTP Time Server.
The Network option ANZ14/NET: can act as a slave clock for Meinberg LANTIME NTP Time Server.
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Manual URL | https://www.meinbergglobal.com/download/docs/manuals/english/anz14_net-option.pdf |
| Form Factor | Aluminium stack case (optional: black anodised) height x width x depth (72mm x 144mm x 132mm), for cutouts of 140mm x 68mm |
| Relative Humidity | Max. 85% |
| Further information |
A serial time sting is generated either once per second, once per minute, on request only or never. Baudrate, framing and time zone can be configured separately by menu and two front panel buttons. It is also possible to use the ANZ14 as a display for a preconnected clock.
Buffered Real Time Clock In case of supply voltage failure the onboard real time clock keeps the time powered by a backup capacitor for more than 150 hours. This capacitor does not need any maintenance and ensures that the ANZ14 returns with the actual time information even before the first Synchronisation. Alternatively, the clock can be ordered with a lithium battery which has a live time of at least 10 years guaranteed. DCF77 Receiver Option: The ANZ14/DCF77 model variant is a standalone radio clock with integrated DCF77 receiver. An external ferrit antenna is used to receive the signal from the DCF77 transmitter and supplies it to the onboard LF receiver where it is demodulated by a straight detector with automatic gain control. The ANZ14/DCF77 will be delivered with an indoor antenna AI01 and 5m cable or, by customers specifications, with an outdoor antenna option AW02. Antenna cables can be prefabricated as required. The connection to the external antenna can be done via BNC connector at the rear panel of the display. Serial Interface The ANZ14 provides two serial ports which can either be used as RS232 or RS422 interfaces. The COM0 interface provides an RS422 output, COM1 provides an RS422 input. On this way, a ANZ14 with DCF receiver can Synchronise an additional ANZ14 without receiver. The transfer rate and the data format are free selectable. The serial port can sent a time string once per second, once per minute or only on request by sending an ASCII character '?' (ASCII code 3Fh). |
| RoHS | Yes |
| Product Type | LED Displays |
| Output Display Type |
12 numeric LED digits for time and date
2 alphanumeric LED digits for day of the week 14mm/13mm character height (time/date), variable brightness Modulation indicated by LEDs Setup menu for configuration Without RF signal the clock runs on XTAL with an accuracy of ±1·10-6 (after 24 hours of synchronous operation), indicated by LED |
| Data format of interfaces |
Baudrate: 9600 baud
Framing: 8N1 RS422 Out via COM0; RS422 In via COM1 Output Strings: Meinberg Standard Time String, Atis or SAT-String |
| Electrical Connectors |
9pin SubD female connector
BNC female connector (ANZ14/DCF77 only) power cord receptacle |
| Scope of supply |
DCF77ANZ only: Scope of supply includes an active ferrite antenna AI01 and 5m of RG174 coaxial cable.
Optional: AW02 with RG58 and patch cord (pre-assembled on demand). |
| WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end use |
| Backup Battery Type | When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years |
| Receiver | ANZ14/DCF77: Narrowband straight receiver with automatic gain control, Bandwidth: approx. 40Hz |
| Reception Control | Multiple check of received time telegram Plausibility control by using two complete time telegrams |
| Key Features |
Stand Alone Radio Clock or Display for external Clock
Adjustable display brightness Good visible LED Display for Time, Date and Day-of-the-Week Buffered hardware clock optional as Slave Clock for Meinberg LANTIME NTP Time Server (ANZ14/NET) Integrated Power Supply (100 - 240VAC) Configuration with two push buttons and setup menu. |
| Operating Temperature | 0 ... 50°C / 32 ... 122°F |
| Interface | Two serial Interfaces - RS232 / RS422, configurable by menu, |
| Power Supply | 100 - 240 V AC (50 - 60Hz), 100mA or 9 - 36 V DC, 500mA or 20 - 60 V DC, 250mA (please specify with your order) |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
