1119200
1119200
LAPP Cable
VDE-registered oil-resistant PVC control cable for a wide range of applications
ÖLFLEX® CLASSIC 110 - PVC control cable, VDE registered, oil resistant and flexible for various applications, 300/500V, also for YSLY or YY
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
1119200 Specifications
- Flame-retardant according IEC 60332-1-2
- Good chemical resistance, see catalogue appendix T1
- Oil-resistant according to DIN EN 50290-2-22 (TM54)
| Attribute | Value |
|---|---|
| Product Brand Name | ÖLFLEX® CLASSIC 110 |
| Approvals | VDE reg. no. 7030 for the following sizes:up to 2.5 mm²: 2 - 65 coresfrom 4 mm²: 2 - 7 coresfrom 25 mm²: 2 - 5 cores |
| Approvals |
|
| Extended Description |
Benefits
|
| Benefits | Wide choice of standardized lengths and individual cuts | Very broad range, items with up to 100 conductors |
| Manufacturer | Lapp |
| Chemical resistant | Yes |
| Power Chain | Yes |
| Number of conductors | 100 |
| mm2 per conductor | 0.75 |
| Protective Conductor | Yes |
| Outer Diameter (mm) | 26.4 |
| Copper index kg per km | 718.0000 |
| Core Identification Code | Black with white numbers acc. to VDE 0293-334 |
| Nominal Voltage | U0/U: 300/500 V |
| Test Voltage |
|
| Benefits |
|
| Product Make Up |
|
| Product Make Up | Fine-wire strand made of bare copper wires | PVC insulation LAPP P8/1 | Cores twisted in layers | PVC outer sheath, grey (similar RAL 7001) |
| Test Voltage | 4000 |
| Core Identification Code HTML |
|
| Conductor Stranding | Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5 |
| Conductor Stranding HTML |
|
| Minimum Bending Radius | Occasional flexing: 10 x outer diameter | In power chains: 15 x outer diameter | Fixed installation: 4 x outer diameter |
| Minimum Bending Radius |
|
| Nominal Voltage HTML |
|
| Temperature Range |
|
| Technical Data |
Core identification code
|
| Applications |
|
| Weight kg per km | 1271.0000 |
| Temperature Range | Occasional flexing: -15°C to +70°C | In power chains: -5°C to +70°C | Fixed installation: -40°C to +80°C |
| Applications | For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load | Dry or damp rooms that are subject to medium mechanical loads | Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG) | In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors |
| Features | Flame-retardant according IEC 60332-1-2 | Good chemical resistance, see catalogue appendix T1 | Oil-resistant according to DIN EN 50290-2-22 (TM54) |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
