HI-3002PCMF
HI-3002PCMF
Holt Integrated Circuits
HI-3002 Series 1 Mbps Controller Area Network transceiver IC
The HI-3002 is a 1 Mbps Controller Area Network (CAN) transceiver optimized for use in aerospace applications. It interfaces between a CAN protocol controller and the physical wires of the bus in a CAN network. Differential output amplitude and current drive capability are specifically enhanced to meet the needs of long cable runs typical of aerospace applications.
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
HI-3002PCMF Specifications
- Compatible with ARINC 825 and ISO 11898-5 standards
- Signaling rates up to 1Mbit/s
- Internal VDD/2 voltage source available to stabilize the recessive bus level if split termination is used (SPLIT pin)
- VIO input allows for direct interfacing with 3.3V controllers
- Detection of permanent dominant on TXD pin (babbling idiot protection)
- High impedance allows connection of up to 120 nodes
- Input levels compatible with 3.3V or 5V controllers
- CANH, CANL and SPLIT pins short-circuit proof to +/-58V
- Will not disturb the bus if unpowered
- Extended temperature range and burn-in options for high reliability applications
| Attribute | Value |
|---|---|
| Product Type | ARINC 825 Data Bus IC |
| Package Description | 16 Pin 4mm x 4mm Plastic Chip Scale (QFN) |
| Moisture Sensitivity Level | 3.0000 |
| Product Longevity | > 10 years |
| Applications |
|
| Flow | M |
| Theta JA (°C/W): | 55.1 |
| Theta JB (°C/W): | 38.5 |
| Temperature Range | -55°C to +125°C |
| RoHS | Yes |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
