3DPM0211

3DPM0211

3DPM0211

3D Plus

Space Qualified Point-Of-Load DC/DC Converter, 5V ± 10% Input, 1.225V to 3.8V adjustable Output, Radiation Hardened Design

The 3DPM0211 PoL DC/DC Converter provides high-performances, high-reliability, compact size and low weight for space applications. Featuring specific radiation effect mitigationtechniques and utilising space design de-rating rules, the 3DPM0211 PoL Converter is an ITAR free product and features a SEL LET threshold of 80 MeV.cm²/mg and a TID of 50 Krad (Si). Based on a Buck topology, the PoL module uses a P Channel Power MOSFET/Schottky diode stage at 400 kHz switching frequency.

From a 5V now available on almost every digital system, the PoL module provides low voltage power supplies for most of today's digital designs. Its Output voltage is adjusted from 1.225V to 3.8V by an external resistor. A very high speed control loop keeps the output voltage within regulation under the high transient load swings commonly found a high speed modern ASICs, FPGAs and memory devices.

The PoL module is fully protected against output overload, input under-voltage and internal over-heating. The external ON/OFF command and Soft Start function enable any power supply ON/OFF sequencing. Power Good signal is available for module survey and may be used for Power on Reset. Input and output EMC filters are integrated to simplify module implementation directly on the digital board with only one additional component (resistor for output voltage adjustment).

Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
Product Type POL Converter
Data_Sheet

To request a datasheet, contact a member of our high-reliability team [email protected]

Package 14-pin Gull Wing SMD
Power Supply
Fixed Switching Frequency 400kHz
Temperature Range
  • 0°C to +70°C
  • -40°C to +85°C
  • -40°C to +95°C
Features
  • Input Voltage: 5V ± 10%
  • Output Voltage adjustable: 1.225V to 3.8V
  • Output current up to 5A
  • Efficiency > 88% (3.3V/0.3A)
  • Excellent dynamic performance
  • Buck converter topology
  • Fixed swithcing frequency (400kHz)
  • Integrated EMC filter
  • Thermal shutdown and current limit protections
  • Power good signal for output voltage monitoring
  • Input Under-voltage protection
  • Soft Start, ON/OFF command
  • Space Qualified Technology
  • Radiation Hardended design
  • Compact Size and Low Weight
  • Junction Temperature Range -40°C to +125°C
  • 14-pin gull wing SMD
  • ITAR Free Product
  • Mass: 4g
  • Size: 12.5 x 11 x 9.4 mm
More Information
Attribute Value
Data Sheet Click here to view