Big Bottle System

The Big Bottle System is an accessory for the RAD8 and RAD7 that enables users to measure radon in 2.5L water samples with high sensitivity. The lower limit of detection is well below 1 pCi/L (40 Bq/m³) radon concentration in water. The upper operating limit is 10,000 pCi/L (400,000 Bq/m³). For ranges higher than that, the standard RAD H₂O accessory is recommended.

The Big Bottle System consists of several components, including the Tubing Set, Support Stand, Elastic Clinching Strap, USB Temperature Logger, Hermetically Sealed Thermocouple, and two 2.5 L Glass Bottles. The tubing set includes a check valve, aerating stones, and an aerator cap. A RAD8 or RAD7 is required, as is either a Laboratory Dryer or DRYSTIK.

The complete system (excluding the optional DRYSTIK), is portable and battery-operated, and the measurement is moderately fast. Even for the lowest radon concentrations you can have an accurate reading of radon in the water within two hours of taking the sample.

The Big Bottle System gives results after 120 minutes of analysis, or less, with a sensitivity that far exceeds that of liquid scintillation methods. The method is simple and straightforward, and there are no harmful chemicals to use. Once the procedure becomes familiar and well understood it will produce accurate results with minimal effort.

Soda Bottle Aerator Kit Accessory

For added convenience and versatility, the Big Bottle System can be used with standard soda bottles of any size from 500ml to 2L. This configuration requires the Soda Bottle Aerator Kit accessory, which features an aerator system similar to that used with the standard 2.5L glass jug.

Larger bottles allow for greater precision and lower limits of detection. With a 500ml bottle, it is possible to measure comfortably down to below 5 pCi/L (200 Bq/m³). With a 2L bottle it becomes possible to measure down to 1 pCi/L (37 Bq/m³).

CAPTURE Software Integration

DURRIDGE’s CAPTURE software makes it easy to download and analyse data recorded using the Big Bottle System. The program provides controls for identifying the specific experiment configuration, and it automatically calculates radon concentrations with respect to the specified water temperature and volumes.