GPSGEN1575
GPSGEN1575
Meinberg
GPS signal converter/diplexer (4-port)
Module for reconverting the Meinberg intermediate frequency to the original GPS frequency.
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Relative Humidity | Max. 85% |
| RoHS | Yes |
| Further information | The module GPSGEN1575 has been designed to reconvert the intermediate frequency of 35.42MHz transmitted on the antenna cable of Meinberg GPS clocks to the GPS frequency of 1575.42MHz. This technology allows the connection of GPS receivers of other manufacturers working without IF-technique to a Meinberg antenna with up to 300m of coaxial cable RG58 (or even up to 600m with RG213) without the need of an additional amplifier. Besides the signal conditioning the Eurocard includes a complete GPS receiver, which can be used as a reference in test applications. |
| Status info | Two LEDs (Lock und Fail) and one TTL-output showing status of the clock |
| Frequency Outputs | 10 MHz with TTL-level |
| Pulse outputs | High-active pulse per second (PPS), TTL-level, pulse width 1 msec, accuracy better than ± 250nsec |
| Data format of interfaces |
Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud data format: 7N2, 7E1, 7E2, 8E1, 8N1, 8N2 Time telegram: Meinberg Standard-Telegram, SAT, Uni Erlangen (NTP), SPA, NMEA0183 (RMC) |
| Electrical Connectors |
64 pin rear VG edge connector DIN 41612
SMB connector for antenna 4 x BNC, output for GPS receivers |
| WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
| Dimensions of the front panel | 12HP/3U (60mm x 128mm) |
| Board Dimensions | 160mm x 100mm, 1,5mm Epoxy |
| Type of Antenna |
Remote powered (by GPSGEN1575) antenna/converter unit
Length of cable up to 300 m (standard coaxial cable RG58) Antenna circuit 1000 V DC insulated |
| Frequency Inputs | 35.42 MHz |
| Ouput Frequency | 1575.42MHz (GPS L1C/A Code), distributed to four outputs |
| Backup Battery Type |
When main power supply fails, hardware clock runs free on quartz basis, almanac data is stored in RAM
Life time of lithium battery min. 10 years |
| Current Consumption | ca. 580mA |
| Receiver | 6 channel GPS C/A-code receiver |
| Board type | Eurocard |
| Mixture Frequency | 10 MHz |
| Key Features |
Reconversion of the Meinberg GPS Antenna signal (35.42MHz) into GPS frequency (1575MHz)
Pulse per second RS-232 interface Status output Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58 Remote control and monitoring with included PC-software (COM0) Standard frequency outputs |
| Operating Temperature | 0 ... 50°C / 32 ... 122°F |
| Interface | Two independent serial RS-232-interfaces, menu configurable |
| Power Supply | +5V DC |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
