CT6845-05
My Cart
£0.00

CT6845-05

CT6845-05

Hioki

Ac/Dc Current Probe CT6845-05 - 500 A AC/DC 100kHz Wideband and High-Precision Current Probe for Power Efficiency Testing

main product photo
Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6845 is a high-precision 500 A AC/DC current probe that features a wide operating temperature range and large jaw diameter, making them ideal for evaluating the operational integrity of devices that are subject to extreme temperature ranges.
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

Request a quote
More Information
Attribute Value
Key Features
  • Ideal for use in environmental testing with broad -40˚C to 85˚C temperature range
  • High precision with a clamp-type design, ±0.3% amplitude accuracy, ±0.1° phase accuracy
  • Wide-bandwidth from DC to 100 kHz
  • Single-handed operation and robust locking mechanism
  • Reduced effects from magnetic fields, conductor position, and noise from nearby wires
  • For EV/HEV battery charge and discharge efficiency testing and inverter and power conditioner conversion efficiency evaluations
Basic Specifications
Rated current 500 A AC/DC
Max. allowable input 1000 A rms (requires derating)
Frequency characteristics DC to 100 kHz
Phase: DC to 100 kHz
Amplitude and phase accuracy DC ±0.3 % rdg. ±0.02 % f.s. (Phase: Not defined)
DC < f ≤ 100 Hz ±0.3 % rdg. ±0.01 % f.s. (Phase: ±0.1°)
Defined to 100 kHz
Output voltage 4 mV/A
(This device outputs AC+DC voltage via the Sensor Unit)
Core diameter φ 50 mm (1.97 in)
Operating temperature, humidity -40 °C to +85 °C (-40 °F to 185 °F), 80% RH or less (with no condensation)
Power supply ±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC)
Power consumption 7 VA max. (at 500 A/55 Hz, ±12 V power requirement)
Dimensions and mass 238 mm (9.37 in)W × 116 mm (4.57 in)H × 35 mm (1.38 in)D, 860 g (30.3 oz), cord length: 3 m (9.84 ft)
Accessories Instruction manual ×1, Mark bands ×6, Carrying Case
Accessory Type Probe
Notes These products cannot be used alone. The optional Sensor Unit is required in order to supply power and connect the clamp to a Memory HiCorder or other instrument. Products can be directly connected to the compatible Power Meters and Power Analyzers.
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. CT6700

    CT6700
  2. L2001

    L2001
  3. 9267

    9267
  4. 9729

    9729
  5. 9665

    9665