FH-AV-BASIC
FH-AV-BASIC
Bird
Aviation RF Cable & Antenna Analyzer Kit for antenna and cable systems in complex airframe systems
Minimize AOG Downtime
Avoid the Aircraft on Ground (AOG) downtime and expense that results from trial and error testing and component swapping.
Bird's FH-AV-BASIC, FlightHawk™ RF Aviation Basic Test Kit provides rapid and accurate testing of multiple antenna and cable systems in complex airframe systems. Our Cable and Antenna Analyzer assist aircraft maintenance technicians with commissioning, maintenance and fault-finding of ground-to-air radios, airborne radios, repeaters, antennas, antenna combiners and transmission cables.
FlightHawk Basic is excellent starter kit for the Novice to Expert, Bird’s easy to use aviation testing software enables maintenance personnel to test and verify all the radio systems in your fleet. By utilizing an inspection technique called frequency domain reflectometer (FDR), you can test and verify the antennas and cables in your RF system individually or as a complete system.
If you want to expand your testing capabilities, this special designed case has placeholders for Bird’s wideband power sensor, needed cabling and adapters –specifically to fit avionics power measurement needs. Also prevents FOD (foreign object damage) from unaccounted equipment. *See upgrade options.
Avoid the Aircraft on Ground (AOG) downtime and expense that results from trial and error testing and component swapping.
Bird's FH-AV-BASIC, FlightHawk™ RF Aviation Basic Test Kit provides rapid and accurate testing of multiple antenna and cable systems in complex airframe systems. Our Cable and Antenna Analyzer assist aircraft maintenance technicians with commissioning, maintenance and fault-finding of ground-to-air radios, airborne radios, repeaters, antennas, antenna combiners and transmission cables.
FlightHawk Basic is excellent starter kit for the Novice to Expert, Bird’s easy to use aviation testing software enables maintenance personnel to test and verify all the radio systems in your fleet. By utilizing an inspection technique called frequency domain reflectometer (FDR), you can test and verify the antennas and cables in your RF system individually or as a complete system.
If you want to expand your testing capabilities, this special designed case has placeholders for Bird’s wideband power sensor, needed cabling and adapters –specifically to fit avionics power measurement needs. Also prevents FOD (foreign object damage) from unaccounted equipment. *See upgrade options.
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Item Name | FlightHawk™, Aviation RF Cable & Antenna Analyzer Kit |
| Languages | English, Chinese, Spanish |
| Key Features |
|
| Frequency Range | 1 – 6000 MHz |
| VSWR Range | 1.0 to 65.0 |
| Resolution | 0.01 dB |
| Frequency Resolution | 1 kHz |
| Frequency Accuracy | ±2.5 ppm @25 °C |
| Temperature Drift | 0.01 dB/°F (0.02 dB/°C) |
| Compliances |
Compliance: CE EMC: Standard EN 61326-1:2006 |
| Output Power | -10 dBm, typical |
| Trace Noise | IFBW 1kHz: 0.05 dB rms |
| Accessories | Cable and Antenna Analyzer, Cal Combo, Stylus, AC Adapter, Hard Carrying Case, RF Cable, USB Drive, USB Adapter |
| Storage Capacity | Thousands of traces and setups |
| Calibration Period | 2 years |
| Maximum Input Voltage | 50V |
| Connectors |
USB Type-C, USB 3.0 Test Port Connector: N-type, Female 50 Ohms |
| Battery |
Type: Lithium-ion rechargeable Operating Time: 10 hours typical Charging Time: 5 hours typical |
| Temperature Range |
Operating: 14 to 131 °F (–10 to +55 °C) Storage: -40 to 176 °F (-40 to +80 °C) Battery Charging: 32 to 95 °F (0 to +35 °C) |
| Dimensions |
7.7 in x 3.6 in x 2.4 in (195 mm x 90 mm x 60 mm) |
| Display | 5.5 in, 720 p |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
