GPSANT
GPSANT
Meinberg
GPS Antenna/Converter Unit
The GPS antenna combines a planar antenna and a frequency converter, which translates the high-frequency phase-modulated spread spectrum signal of the GPS system to an intermediate frequency. This way a standard coaxial cable (e.g. RG58) can be used for the connection with the GPS clock and a distance of up to 300 meters (with RG58) or even 700 meters (with a low-loss cable type like RG213) between receiver and antenna is possible without an additional amplifier.
GPS reception can only be reliable if the antenna has a free view of the sky, therefore it needs to be installed at a suitable location, e.g. on a rooftop. The unit is remotely powered by the connected GPS receiver (via the antenna cable) and can be used only with GPS equipment from Meinberg.
Mounting material (plastic pole and holders, clamps for wall or pole mounting) is shipped with all Meinberg GPS antennas for easy installation. A standard cable of 20 meters is included. Please speak to a member of our team if you require a different cable length.
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Manual URL | https://www.meinbergglobal.com/download/docs/manuals/english/gpsant.pdf |
| Form Factor | ABS plastic case for outdoor installation (IP66) |
| Further information |
GPS reception can only be reliable if the antenna has a free view of the sky, therefore it needs to be installed at a suitable location, e.g. on a rooftop. The unit is remotely powered by the connected GPS receiver (via the antenna cable) and can be used only with GPS equipment from Meinberg.
Mounting material (plastic pole and holders, clamps for wall or pole mounting) is shipped with all Meinberg GPS antennas for easy installation. A standard cable of 20 meters is included. Please specify your order, if you need a different cable length. |
| Bandwidth | 9 MHz |
| Warranty | 3 years |
| WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
| Antenna Connector | Type-N connector |
| Operating Frequency Range |
Antenna: |
| RoHS | Yes |
| Key Features |
|
| Operating Temperature | -60°C to +80°C |
| Power Supply | 12V - 18V, @ 100mA (provided via antenna cable) |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
