IMS - LANTIME M1000

With up to 25,000 NTP requests per second, the system is able to provide time for hundreds and thousands of NTP clients. The LANTIME module supports the following protocols:

• IPv4
• IPv6
• NTP / SNTP (v2, v3, v4)
• PRP (IEC 62439-3)
• HTTP (S)
• SSH
• Telnet
• SNMP (v1, v2, v3)
• FTP
• SFTP
• DHCP/DHCPv6

For each system, up to 99 logical network interfaces are available (99 IPv4 and 99 IPv6 addresses).

Scalable NTP Time Server System

All modules are hot-plug capable and the modules can be configured via the central web interface (from the CPU module). Almost infinite number of combinations of input and output modules are available to meet almost any Synchronisation task. Because of simple extension by upgrading the system with new modules the scalability of the M1000 system is ensured.

Slots for Input Signals:

• IMS-MRI: Standard reference inputs
• IMS-ESI: Extended reference inputs
• Both of these reference input interfaces may also be used as I/O slot

Front Panel

The front panel of LANTIME M1000 integrates the familiar LC-Display with 4x16 characters and the well known LANTIME menu panel with 4 directional and 4 function buttons. This allows for a simple and fast on-site configuration of the main parameters. Hundreds of configuration options for the LANTIME CPU and the IMS input and output modules can be changed using the powerful web interface.

The Active Cooling Module allows the installation of the M1000 safely within the temperature specification. The ACM is easily field-replaceable and allows for a hot-plug replacement without the need to power down the unit.

• GPS - Global Positioning System
• GLONASS - Russian GNSS
• GALILEO - European GNSS
• BeiDou - Chinese GNSS
• PZF - German DCF77 longwave radio signal
• PTP/IEEE1588 - Precision Time Protocol
• NTP - Network Time Protocol
• SyncE - Synchronous Ethernet
• Timecodes - IRIG/AFNOR timecodes (AM/DCLS)
• PPS -Pulse Per Second
• 10MHz - 10MHz reference frequency
• 2.048kHz - 2.048kHz reference frequency
• E1/T1 - Telecom Synchronisation Input with full SSM/BOC support

• Reference time
• Ttime service
• Network
• Alarm

• CPU-C05F1 : 1 x 10/100 MBit, RJ45
• CPU-C15G2 : 1 x 100/1000BASE-T RJ45, 1 x 1000BASE-T SFP
• Network Expansion - LNE Options: Up to 16 additional network interfaces (GbE Gigabit Support) with 10/100/1000 MBit RJ45 connector or 1000BASE-T SFP (Multimode / Singlemode).

• 1x USB Port in front panel
• install firmware upgrades
• backup and restore configuration files
• copy security keys
• lock/unlock front keys

• AD10: 90-265 V AC, 47-63 Hz / 90-250 V DC
• DC20: 20–60 V DC
• DC10: 10–36 V DC
• Redundant power supplies available

• CPU-C15G2
• Intel® Atom™ Processor E Series (2 Cores, 1.33GHz, TDP 3W)
• Main Memory: onboard 2 GB
• Cache Memory: 1MB 2nd Level Cache
• Flash Disk: 4 GB
  CPU-C05F1
• AMD Geode™ LX 800 (500 MHz, 128 KB L2 cache, 3.6 W)
• Main Memory: onboard 256 MByte
• Flashdisk: 1 GB

• IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131)
• IPv6: Dynamic Host Configuration Protocol - DHCPv6 (RFC 3315) and Autoconfiguration Networking - AUTOCONF (RFC 2462)

• NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905)
• SNTP v3 (RFC 1769), SNTP v4 (RFC 4330)
• MD5 / SHA-1 Authentication and Autokey Key Management

Software updates are provided free of charge, for the lifetime of your Meinberg product.

• Optimised space usage
• Synchronisation of NTP and SNTP compatible clients
• Web-based status and configuration interface and console-based graphical configuration utility
• IMS - Intelligent Modular System platform
• Up to 4 PTP (IEEE 1588-2008) modules
• Redundant power and receiver option (eg GPS / GLONASS combination)
• Hot Plug
• Arbitrary combinations of modules
• Meinberg's LANTIME time server is available with a variety of additional output options: IRIG Time Code, frequency synthesiser and programmable pulse outputs illustrate some of the many expansion options for your NTP server
• Up to 16 additional LAN ports