3DCM739 - 3DCM734

3DCM739 - 3DCM734

3DCM739 - 3DCM734

3D Plus

4 Mpx High Resolution Image Sensor, Bayer (RGB) / Monochrome Configuration, Radiation Hardened Design

The space camera module has been designed based on the 3D PLUS technology and includes 4 stacked levels in order to obtain a 3D cube with a reduced volume of 35x35x23 mm3. The top level contains the 2048x2048 pixels CMOS image sensor which is the key element of the camera. Images are provided by the CMOS sensor through the 10 LVDS multiplexable output pairs.

The input supply voltage of the microcamera module can be set from 4.5Vto 9V. Four different voltages (3.3V, 2.5V, 2.1V and 1.5V) are internally generated by four voltage regulators in order to feed the sensor, the oscillator, the FPGA and the memories. Volatile and non-volatile memories are also included and can be used, among other applications, for video data streaming or to load the register state. The FPGAcan store images in the volatile memory placed on the same level and perform preliminary image processing as averaging, adding, windowing etc.

The bottom of the camera contains a PGA array where a rigid-flex pcb can be connected to ensure the link to the system. The PGA array is able to cover a wide range of connections, from LVDS to SpaceWire depending on the FPGA code. As the CMOS sensor is sensitive to Single Event Effects, current limitation capability is integrated in the module in order to be able to switch-off the power supply to the sensor in case of SEL or SET. This instrument has been integrated using the 3D PLUStechnology in orderto be as compact as possible.Particular attention has been paid to ensure a good radiation tolerance to cover a wide range of scientific applications such as planetology, but also platforms or launchers monitoring and star trackers.

Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
  • 2048 (H) * 2048 (V) active pixels on 5.5µm pitch
  • User re-configurable FPGA
  • Frame rate:
    • 7 frames/s @ full resolution (12-bit mode)
    • 16 frames/s @ full resolution (10-bit mode)
  • Embedded 2x512Mb SDRAM and 8Gb NAND Flash
  • Integrated clock and Timing generator
  • Integrated Image Signal Processor
  • Programmable gain amplifier and offset regulation
  • 13 general purpose signals
  • 10 LVDS output pairs and 2 LVDS input pairs
  • Space Qualified Technology
  • Radiation Hardened design
    • TID > 40 krad(Si)
    • SEL LET > 60 MeV.cm2/mg
  • Operating Temperature Range -40°C / +70°C
  • 55-pin PGA
  • ITAR Free Product - Worldwide delivery guarantee
  • Size: 35 x 35 x 23 mm
  • Mass: 64 g
Product Type 4 Megapixels CMOS Space Camera Head and IPs
Memory 2x 512Mb SDRAM and 8Gb NAND Flash
Temperature Range -40°C / +70°C
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. 3DIPCC0735-1
  2. 3DCM800 - 3DCM828
  3. 3DIPCC0746-1
  4. 3DIPCC0737-1
  5. 3DIPCC0736-1