3DIPCC0737-1

3DIPCC0737-1

3DIPCC0737-1

3D Plus

CMOS Sensor Controller IP Core for 3DCM734/3DCM739, Simple sensor configuration and control, Low level image processing (binning, windowing)

3DIPCC0737-1 is an IP memory controller intended to be used with the CMOS sensor integrated into the 3D Plus CMOS Space Camera modules: 3DCM739 (RGB sensor) and 3DCM734 (monochrome sensor). This code makes it possible to get access to all the registers of the CMOS sensor. It has been developed according to ECSS-Q-ST-60-02C ESA standards.

Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
Product Type 4 Megapixels CMOS Space Camera Head and IPs
Data_Sheet

To request a datasheet, contact a member of our high-reliability team [email protected]

Features
  • Generate frame requests and read-out the sensor
  • Request and verify LVDS links calibratation (synchronisation of the receiving side with the LVDS outputs of the sensor
  • Frame rate
    • 16 frames/s at full resolution (10-bit mode)
    • 7 frames/s at full resolution (12-bit mode)
  • Low level image correction functionalities (defective pixels correction, background noise reduction) by implementing a 2x2 binning algorithm
  • Ability to provide telemitry with:
    • The image itself
    • Integration time
    • Gain
    • Window position and size (X/Y offsets and width/height)
    • Test mode
    • Health status
    • Self-test
  • Configuration of the following parameters by telecommand:
    • Integration time
    • Gain
    • Window position and size (X/Y offsets and width/height)
  • Complete access to the SPI configuration registers of the sensor
  • Ability to provide the sensor's temperature at a frequency of 1Hz by using the on-chip sensor
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. 3DCM739 - 3DCM734
  2. 3DCM800 - 3DCM828
  3. 3DIPCC0746-1
  4. 3DIPCC0735-1
  5. 3DIPCC0736-1