CT9557
CT9557
Hioki
Sensor Unit
Aggregate and measure large currents in multi-cable circuits
Hioki pass-through current sensors and clamp on current probes are best-in-class current sensing devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9557 is 4-channel sensor unit and power adapter for any of the CT686x series, 9709 and CT684x series current sensors and probes that provides waveform and RMS output
Key Features
- Power supply for high-precision current sensors with waveform output functionality
- Output a single waveform from an aggregate of input waveforms
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Power Supply | AC Adapter Z1002 (100 to 240 V AC, 50/60 Hz, maximum rated power when used with sensors: 155 VA) External power supply (10 to 30 V DC; maximum rated power: 60 VA) |
| Included Accessories | AC Adapter Z1002 ×1, Power cord ×1, Instruction manual ×1 |
| Dimensions and Weight | 116 mm (4.57 in)W × 67 mm (2.64 in)H × 132 mm (5.20 in)D (excluding protruding parts),420 g (14.8 oz) |
| Rated Current | Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) |
| Offset Voltage | 50 Ω |
| Output Voltage Rate | Waveform output/ Total waveform output: 2 V f.s. Total RMS output: 2 V DC f.s. Waveform output (4CH), total waveform output and total RMS output can be used simultaneously |
| Operating Temperature and Humidity | -10 °C to 50 °C (14 °F to 122 °F) |
| Output Cable Length | BNC Terminal |
| Connectable Current Sensors | Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a current sensor equipped with a PL23 (10-pin) terminal |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
