MR8791

Hioki

Pulse Generator Unit for Hioki Memory HiCorders

Skip to the beginning of the images gallery

Pulse Generator Input Module for Control Simulation Testing

The Pulse Generator Unit MR8791 is a plug-and-play module for Hioki Memory HiCorders to conduct control simulation testing of control boards on equipment such as engine, airbags, brake systems, and power steering.

Key Features

Output pulse waves, pattern waves up to 8 channels per unit (output signals of TTL level, or open-collector)
For limited models only (Cannot be used for 8847, MR8847-01, MR8847-02, MR8847-03)
Isolated between unit and output (Not isolated between each channel [common ground])

Note: This module must be used with the Memory HiCorder. Output cords are not included.

Specifications

More Information
Attribute	Value
Lead Time	Usually available in 5-7 weeks
Dimensions and Weight	106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 230 g (8.1 oz)
Output Terminal	Number of channels: 8, Connector: D-sub, half-pitch, 50-pin Max. rated voltage to ground: 30 V rms AC or 60 V DC (between unit and output channels) Logic output/Open collector output
Output Mode	Output Mode 1 Pattern output: Read frequency: 10 Hz to 120 kHz, 2048 logic patterns Pulse output: Frequency 0.1 Hz to 20 kHz, Duty 0.1% to 99.9% Output Mode 2 Logic output: Output voltage level: 0 V to 5 V (H level: 3.8 V or more, L level: 0.8 V or less) Open collector output: Absolute maximum rated voltage for collector/emitter: 50 V Overcurrent protection: 100 mA
Other	Self-test function