N9912C
N9912C
Keysight Technologies
Keysight N9912C FieldFox RF Analyzer (CAT, VNA or SA), Up to 10 GHz, FieldFox C-Series
FieldFox Handheld RF Analyser, up to 10 GHz
With the Keysight N9912C upgradable and license-key activated frequency, bandwidth, and over 20 software applications, easily customize your analysis to your requirements. Mix and match VNA and SA frequencies, and effortlessly upgrade the capabilities of your analyzer as your needs change. Choose the FieldFox software-defined configuration that best meets your needs.
Keysight N9912C Product Highlights:
- Select from cable and antenna analyser (CAT), Vector Network Analyser (VNA), and/or
- Spectrum Analyser with desired maximum frequency.
- Capture elusive signals with up to 40 MHz gap-free, real-time bandwidth.
- Measure all four S-parameters simultaneously with 115 dB dynamic range.
- Make accurate spectrum analyser measurements (± 0.3 dB) without warmup.
- Perform over-the-air measurements for 5G NR and LTE.
- Use GPS/GNSS for geolocation and timestamping.
- Carry one lightweight unit at 3.4 kg (7.4 lb).
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Bandwidth | 40 MHz |
| Whats Included |
|
| Bandwidth Options |
|
| Applications |
|
| Software | |
| Phase Noise @ 1 GHz (30 kHz Offset) | -114 dBc/Hz |
| Additional CAT / VNA Based Features |
|
| SA Start Frequency | 3 kHz |
| Maximum Frequency | |
| Minimum Frequency | 3_kHz |
| Minimum Frequency | 3 kHz |
| Number of Built In Ports | |
| Dynamic Range |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
