SP3000
My Cart
£0.00

SP3000

SP3000

Hioki

Non-Contact Ac Voltage Probe SP3000 - Capture Voltage Signals from Outside the Wire Cover

main product photo
The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involving device control signals and sensor signals.  Simply apply the probe to a cable outside its insulation cover to capture the signal without exposing the technician to electrocution.
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

Request a quote
More Information
Attribute Value
Key Features
  • Observe waveforms with an oscilloscope or a Hioki Memory HiCorder by visualizing signals from electric equipment simply by applying the probe to the wire’s insulation
  • Capture LIN and other communications signals
  • Measure signals from electric equipment on vehicles
  • Miniaturization of devices and use of waterproof connectors make it impossible to establish contact with metal terminals
  • Connectors can’t be removed due to reduced ability to reproduce phenomena
  • There is need to avoid tearing the wire insulation so as to prevent risk of damage to the sensor due to static electricity
Basic Specifications
Measurement method Capacitive-coupled current cancellation (not suitable for use with bare conductors)
Measurable wire type Insulated wire
Maximum input voltage RMS : 30 Vrms or less, Peak : 42.4 Vpeak or less
Dimensions and mass 15.0 mm (0.59 in) W × 13.9 mm (0.55 in) H × 77.4 mm (3.05 in) D mm, 52 g (1.83 oz) (including cable)
Accessory Type Probe
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. CM7290

    CM7290
  2. P9000

    P9000
  3. 8423

    8423
  4. 9665

    9665
  5. SP7002

    SP7002