ANZ14/NET
ANZ14/NET
Meinberg
Network Time Display
Time and Date Display with NTP Synchronised Reference
ANZ14/NET is a LED display with network (Ethernet) connection. It was designed to display the time (hours, minutes and seconds) as well as the date (day, month, year and day of the week). The free running clock is being Synchronised cyclic via the network connection (RJ45 10/100MBit) by a NTP time server using the Network Time Protocol.
ANZ14/NET is a LED display with network (Ethernet) connection. It was designed to display the time (hours, minutes and seconds) as well as the date (day, month, year and day of the week). The free running clock is being Synchronised cyclic via the network connection (RJ45 10/100MBit) by a NTP time server using the Network Time Protocol.
Contact us for Lead Time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Manual URL | https://www.meinbergglobal.com/download/docs/manuals/english/anz14_net-option.pdf |
| Form Factor | Aluminium stack case (optional: black anodised) height x width x depth (72 mm x 144 mm x 132 mm), for cutouts of 140 mm x 68 mm |
| Relative Humidity | Max. 85% |
| Further information |
The UTC time sent by the NTP server is converted into the users local time by configurable parameters and displayed correspondingly. A dot in the LED display and/ or a numerical error code indicates a malfunction. Configuration occurs via network using a Telnet connection. The ANZ14/NET is a stand-alone free running clock with integrated power supply that is Synchronised via network connection using NTP. The 14-digit LED display shows time, date and day-of-week. The display brightness is variable. A serial time string is generated either once per second or once per minute. Baudrate and framing are set to 9600 baud, 8N1. This configuration must not be changed.
DIS14/NETOption DIS14/NET with green Display and brightness adjustment The front panel of the DIS14/NET contains three push buttons. Pressing the button "Mode" for at least two seconds enables the setup menu (LED "Setup" is switched on). This menu allows the configuration of the features provided by the DIS14/NET. All available sub menus are selected by the "Mode" push button while both "Brightness" push buttons (+ and -) are used to set the value or to select the available options. |
| Product Type | NTP Displays |
| Output Display Type |
ANZ14
12 numeric LED digits for time and date 2 alphanumeric LED digits for day of the week 14 mm / 13 mm character height (time/date) DIS14 6-digit numeric/alphanumeric LED display for time, date, day-of-week and error code Digit height: 20 / 13 mm ANZ14, DIS14 variable brightness Modulation indicated by LEDs Setup menu for configuration Free running indicated by LED when switching to operation as a free running quartz clock |
| Interface | Two serial Interfaces: RS-232 / RS-422, configurable by menu, Baudrate: 9600 baud Framing: 8N1 RS-422 Out via COM 0; RS-422 In via COM 1 Output Strings: Meinberg Standard Time String, Atis or SAT-String |
| Electrical Connectors |
9pin SubD female connector RJ-45 Network connector power cord receptacle |
| Scope of supply | ANZ14/NET Display, power cable, USB Flash Drive with manual and Meinberg software |
| WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end use |
| Backup Battery Type | When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years |
| RoHS | Yes |
| Key Features |
Slave Clock/Display for LANTIME Time Servers
Good visible LED Display for Time, Date and Day-of-the-Week Two Interfaces (RS-232 / RS-422) Buffered hardware clock Integrated Power Supply (100 - 240 V AC or DC) |
| Operating Temperature | 0 ... 50°C / 32 ... 122°F |
| Power Supply | 100 - 240 V AC (50 - 60Hz), 100mA or 9 - 36 V DC, 500mA or 20 - 60 V DC, 250mA (please specify with your order) |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
