CPU-C05F1

CPU-C05F1

CPU-C05F1

Meinberg

Management and NTP Processor Module

As the central management and control element, the CPU module in an IMS system is responsible for management, configuration and alarm notifications. It additionally provides NTP and SNTP services on its network interfaces. The IMS-CPU model C05F1 comes with one integrated 10/100base-T port, additional network ports can be added by installing LNE cards.
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
Technical Support Meinberg offers free lifetime technical support via telephone or e-mail.
Relative Humidity Max. 85%
Further information The IMS-CPU runs Meinberg's LTOS V6 / V7 firmware generation with an incredible feature set. The LTOS network concept allows to configure up to 99 logical network interfaces and assign them to one of the physical network ports or a link aggregation group. Network services like HTTP, SSH or NTP can be individually enabled/disabled for each virtual interface. Each CPU can manage up to 99 physical ports in theory and offers enterprise features like VLAN (IEEE 802.1Q), QoS/traffic priorization (DSCP and IEEE802.1p) as well as full IPv6 support. The powerful web based configuration interface provides access to all important LTOS parameters and functions. Multiple firmware versions can be installed on one unit, making it easy to try out new versions and roll back to a previous version with one mouse click. Backing up system configuration is easier than ever with the LTOS capability to store multiple revisions of the configuration on a unit and offer different ways to upload and download configuration sets.
The web GUI, accessible using both HTTP and HTTPS, is accompanied by the command line interface (CLI). Administrators can log in via SSH, Telnet or the serial console port and, with the appropriate access level, will find a standard shell environment with full script support and hundreds of well known Unix commands. A full featured SNMP management service supporting SNMP V1, V2c and V3 (auth and privacy) including a large selection of standard MIBs and a Meinberg specific enterprise MIB offers a proven way to integrate the system into an existing network management system. A USB port allows to backup/restore configuration sets using a USB memory stick and can be used to install a new firmware version on the device. If required, both the USB port and the access to the LC menu can be disabled.
RoHS Yes
Network Interface 1 x 10/100 MBit RJ45
Up to 5,000 NTP requests/second
Universal Serial Bus (USB) Ports 1x USB Port in front panel
install firmware upgrades
backup and restore configuration files
copy security keys
lock/unlock front keys
CPU
  • AMD Geode
  • LX 800(500 MHz, 128 KB L2 cache, 3.6 W
  • Main Memory: onboard 256 Mbyte
  • Cache Memory: 16 KB 2nd Level Cache
  • Flash Disk: 1 GB
Electrical Connectors Network connector: 10/100 Base-T via RJ45 jack
Operating System of the SBC GNU/Linux 4.x
Network protocols OSI Layer 4 (transport layer) TCP, UDP
Network protocols OSI Layer 7 (application layer) TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP
Internet Protocol (IP) IP v4, IP v6
Network Autoconfiguration Support
  • IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131)
  • IPv6: Dynamic Host Configuration Protocol - DHCPv6 (RFC 3315) and Autoconfiguration Networking - AUTOCONF (RFC 2462)
Network Time Protocol (NTP)
  • NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905)
  • SNTP v3 (RFC 1769), SNTP v4 (RFC 4330)
Time Protocol (TIME) Time Protocol (RFC 868)
Daytime Protocol (DAYTIME) Daytime Protocol (RFC 867)
IEC 61850 Synchronisation of IEC 61850 compliant devices by using SNTP
Hypertext Transfer Protocol (HTTP) HTTP/HTTPS (RC 2616)
Secure Shell (SSH) SSH v1.3, SSH v1.5, SSH v2 (OpenSSH)
Telnet Telnet (RFC 854-RFC 861)
Simple Network Management Protocol (SNMP) SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418)
Firmware Updates Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product.
WEEE status of the product B2B. Return to manufacturer
Key Features
  • Synchronisation of NTP and SNTP compatible clients | Web-based status and configuration interface and console-based graphical configuration utility
Operating Temperature 0 ... 50°C / 32 ... 122°F
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. IMS-FDM
  2. IMS-MRI
  3. IMS-VSI
  4. IMS-LIU
  5. IMS-TCR