IMS-PZF Clock
IMS-PZF Clock
Meinberg
PZF (DCF77) Correlation Receiver (Eurocard)
High accuracy DCF77 correlation receiver for generation of standard frequencies and pulses.
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Manual URL | https://www.meinbergglobal.com/download/docs/manuals/english/ims-pzf-receiver.pdf |
| Relative Humidity | Max. 85% |
| Further information | By evaluating the pseudo-random sequence (PZF), which is part of the DCF77 signal in addition to the amplitude modulation, the PZF clock is capable to reproduce a time pattern in the range of microseconds. This allows generation of high precision pulses and an accurate adjustment of the main oscillator of the system. Besides various standard frequencies, the board provides a programmable frequency output. Additional features of IMS-PZF clock are pulses per second (PPS) and per minute (PPM) and IRIG timecode outputs. |
| RoHS | Yes |
| Status info |
Status info by 4 LED light indicators (2mm light pipes)
|
| Frequency Outputs | Accuracy depends on oscillator (standard: OCXO-SQ), see oscillator list |
| Pulse outputs | Pulse per second (PPS) and pulse per minute (PPM). TTL level, pulse width: 200msec |
| Accuracy of Pulse Outputs | Better than +/- 50μsec after Synchronisation and 20 minutes of operation. |
| Data format of interfaces |
COM 0:
Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud Data Format: 7N2, 7E1, 7E2, 7O1, 7O2, 8E1, 8N1, 8N2, 8O1 Time telegram: Meinberg Standard-Telegram , SAT, Uni Erlangen (NTP), COMPUTIME, SPA, RACAL, ION or Capture-Telegramm |
| Generated Time Codes |
IRIG B002: 100pps, DCLS signal, no carrier, BCD time of year
IRIG B122: 100pps, AM sine wave signal, 1 kHz carrier, BCD time of year IRIG B003: 100pps, DCLS signal, no carrier, BCD time of year, SBS time of day IRIG B123: 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day IRIG B006: 100 pps, DCLS Signal, no carrier, BCD time-of-year, Year IRIG B126: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time-of-year, Year IRIG B007: 100 pps, DCLS Signal, no carrier, BCD time-of-year, Year, SBS time-of-day IRIG B127: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time-of-year, Year, SBS time-of-day IEEE1344: Code according to IEEE1344-1995, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day, IEEE1344 expansion for date, time zone, daylight saving and leap second in Control Functions Segment C37.118: Like IEEE1344 - with turned sign bit for UTC-Offset AFNOR: Code according to NFS-87500, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, complete date, SBS time of day |
| Power supply - Maximum Power Range | +5V DC |
| Electrical Connectors | 96-pin VG-rail DIN 41612 |
| WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
| Type of Antenna | DCF77 outdoor antenna AW02 |
| Cable type | Coaxial cable RG58 indoor or outdoor usage (BNC-, N-Norm-connector) |
| Synchronisation Time | 2-3 minutes after correct DCF77 signal reception |
| Switch Outputs |
Four TTL outputs can configured independently for the following modes:
- free programmable cyclic or fixed impulses - timecode - timer mode; three 'ON'- and three 'OFF'-states can be setup per day The switch states can be inverted for all three outputs, the impulse lengths are configurable. The impulse output can be configured for all channels together to 'always' or 'ifsync'. |
| Antenna Connector | BNC-connector |
| Backup Battery Type |
CR2032 - button cell lithium battery
When main power supply fails, hardware clock runs free on quartz basis, almanac data is stored in RAM Life time of lithium battery min. 10 years |
| Current Consumption | +5 V 1,1 A to 1,4 A (depends on oscillator option) |
| Receiver |
Quadrature receiver for optimized evaluation of the DCF signals (amplitude and phase modulation)
Accuracy of pulse outputs: Time delay between two systems with max. distance of 50 km: typ. 20 µsec, max 50 µsec Time shift of successive pulses: max 1.5 µsec |
| Key Features |
|
| Operating Temperature | 0 ... 50°C / 32 ... 122°F |
| Interface | Single serial RS-232 interface |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
