SP3000
My Cart
£0.00

SP3000

SP3000

Hioki

Non-Contact Ac Voltage Probe SP3000 - Capture Voltage Signals from Outside the Wire Cover

main product photo
The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involving device control signals and sensor signals.  Simply apply the probe to a cable outside its insulation cover to capture the signal without exposing the technician to electrocution.
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

Request a quote
More Information
Attribute Value
Key Features
  • Observe waveforms with an oscilloscope or a Hioki Memory HiCorder by visualizing signals from electric equipment simply by applying the probe to the wire’s insulation
  • Capture LIN and other communications signals
  • Measure signals from electric equipment on vehicles
  • Miniaturization of devices and use of waterproof connectors make it impossible to establish contact with metal terminals
  • Connectors can’t be removed due to reduced ability to reproduce phenomena
  • There is need to avoid tearing the wire insulation so as to prevent risk of damage to the sensor due to static electricity
Basic Specifications
Measurement method Capacitive-coupled current cancellation (not suitable for use with bare conductors)
Measurable wire type Insulated wire
Maximum input voltage RMS : 30 Vrms or less, Peak : 42.4 Vpeak or less
Dimensions and mass 15.0 mm (0.59 in) W × 13.9 mm (0.55 in) H × 77.4 mm (3.05 in) D mm, 52 g (1.83 oz) (including cable)
Accessory Type Probe
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. 9322

    9322
  2. 9267

    9267
  3. 3269

    3269
  4. 9132-50

    9132-50
  5. P9000

    P9000