SyncBox/N2X
SyncBox/N2X
Meinberg
Converts NTP or IEEE-1588 to IRIG, 10MHz, PPS, DCF77 and serial time telegrams
The SyncBox/N2X operates as an IEEE-1588 multicast slave clock or NTP client in a PTP / NTP network and with its interfaces this converter can Synchronise many different systems. Our IEEE-1588 PTP Grandmaster Clocks or a LANTIME NTP Server can be used as a reliable time source.
Contact us for Lead Time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Manual URL | https://www.meinbergglobal.com/download/docs/manuals/english/syncbox_n2x.pdf |
| Technical Support | Meinberg offers free lifetime technical support via telephone or e-mail. |
| Power Consumption | 5W |
| Form Factor | Aluminium Desktop Case TUG 05 160 L MS (like GOAL / DOAL). Physical Dimensions: 105 mm x 45 mm x 160mm (W x H x D) |
| Relative Humidity | Max. 85% |
| Further information |
The Meinberg SyncBox N2X is Synchronised by a PTP Grandmaster or by a NTP Server and can be used as a time source for equipment that requires IRIG AM, Freq.Synth/sine, PPO (PPS, PPM, PPH, IRIG DCLS, Cyclic Pulses, Single Shot, Timer, DCF77 Mark, Time Sync, Freq. Synth./TTL, Time Slots) or serial time string for Synchronisation.
Optionally, the following output configurations are available: 3 x PPO via BNC Out 1 - Out 3 2 x PPO via BNC Out 1 / Out 2 and TC AM Out 3 PPO Out 1, Freq. Synth/sine Out 2, TC AM Out 3 Instead of three BNC connectors, the SyncBox N2X can also be equipped with three photomos outputs: 3 x PPOs with 2-pin sockets (DFK2), or with 3 x ST - fiber optical female connectors The configuration and monitoring of the system can be done with our Meinberg Device Manager Software. The current setup file can be downloaded here. In order to support network management systems the SyncBox offers an extensive SNMP interface, which can be accessed by SNMP V1. It allows the monitoring of all relevant system parameters (including operating system parameters, network interface statistics, detailed NTP status information as well as the complete system configuration) and can be used to alter the SyncBox configuration via SNMP set commands, too. The used PTP stack implementation is fully compatible to all IEEE 1588 PTPv2 - systems and supports PTP management messages. The SyncBox N2X is equipped with a high precision oscillator ""TCXO". The oscillator determines the long-term stability in holdover mode, ie when the Synchronisation with the time source is disturbed. Oscillator update to OCXO-HQ is possible. |
| Interface | Single serial RS-232 interface |
| Control elements | Meinberg Device Manager via RS-232 serial interface or network connector (RJ45 jack) |
| Status info | 4 Status LEDs: ST - State blue: during initialisation green: normal operation IN - Input red: no network connected (network recognition requires a few minutes after connecting) yellow: signal is available but not synchron green (blink):Control by input signal, internal clock is Synchronised but not accurate green: Oscillator has warmed up, the internal clock runs accurate SP - Speed out: no cable connection yellow: 10 Mbit green: 100 Mbit LI - Link Activity out: no cable connection yellow (blink): if network traffic and 10 Mbit grün (blink): if network traffic and 100 Mbit |
| Accuracy of Pulse Outputs | PTP: +/- 100 ns (relative to the used IEEE 1588 Grandmaster Clock, after initial Synchronisation phase) NTP: +/- 1 ms (relative to NTP when using a local time server) * after warm-up period |
| Network Interface | RJ-45 Network Connection 10/100 MBit |
| Generated Time Codes |
IRIG B002: 100pps, DCLS signal, no carrier, BCD time of year IRIG B122: 100pps, AM sine wave signal, 1 kHz carrier, BCD time of year IRIG B003: 100pps, DCLS signal, no carrier, BCD time of year, SBS time of day IRIG B123: 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day IRIG B006: 100 pps, DCLS Signal, no carrier, BCD time-of-year, Year IRIG B126: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time-of-year, Year IRIG B007: 100 pps, DCLS Signal, no carrier, BCD time-of-year, Year, SBS time-of-day IRIG B127: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time-of-year, Year, SBS time-of-day IEEE1344: Code according to IEEE1344-1995, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day, IEEE1344 expansion for date, time zone, daylight saving and leap second in Control Functions Segment C37.118: Like IEEE1344 - with turned sign bit for UTC-Offset AFNOR: Code according to NFS-87500, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, complete date, SBS time of day |
| Network protocols OSI Layer 7 (application layer) | SNMP V1 - Monitoring of system parameters |
| Network Time Protocol (NTP) | Up to seven configurable external NTP time server min. and max. polling interval (8s – 1024s) standard NTP options (no select, true, prefer, iburst) |
| Scope of supply | SyncBox, 5-pin DFK clamp (DC power supply only), USB Flash Drive with manual and Meinberg software. |
| Firmware Updates | Firmware is field-upgradeable, updates can be installed directly at the unit via serial connection and with MBGFLASH tool. Software updates are provided free of charge, for the lifetime of your Meinberg product. |
| WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
| Precision Time Protocol (IEEE 1588) |
UDP/IPv4 (L3) or IEEE802.3 (L2) Multicast
E2E, E2E Hybrid or P2P Delay Mechanism PTP Subdomains (0-255) Power Profile compatible |
| Available Output Signals | PPO (PPS, PPM, PPH, TC DCLS, DCF77 Marks), TC AM, serial timestring (Meinberg, Uni Erlangen, NMEA) and Frequency Synth. Sine |
| Unmodulated Time Code Output | DCLS, TTL into 50 Ohm (PWM-DC Signal) via BNC female connector, high active or via FO connector (Fiber Optical) |
| Modulated Time Code Output | Optional IRIG AM sine wave signal via female BNC connector (Out 3): 3Vpp (MARK), 1Vpp (SPACE) into 50 Ohm |
| RoHS | Yes |
| Key Features |
The following output signals are available:
|
| Operating Temperature | 0 ... 50°C / 32 ... 122°F |
| Power Supply | 20-60 V DC; Option: PoE (Power over Ethernet - IEEE802.3af compliant), 36-60 V DC |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
