9660
9660
Hioki
Clamp on Sensor
For measuring load current, voltage output sensor 100 A AC
Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9660 is a 100A AC clamp sensor with voltage output for measuring load current.
CAT III 300V
Key Features
For inverter devices or commercial power lines
Fits in narrow spaces due to compact design
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Max Allowable Input | Continuous 130 A (45 to 66 Hz) |
| Dimensions and Weight | 46 mm (1.81 in)W × 135 mm (5.31 in)H × 21 mm (0.83 in)D, 230 g (8.1 oz) Cord length 3 m (9.84 ft), Output terminal: BNC |
| Basic Accuracy | ±0.3 % rdg. ±0.02 % f.s. ±1° (45 Hz to 5 kHz) |
| Rated Current | 100 A AC |
| Frequency Bandwidth | Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy) |
| Output Voltage Rate | 1 mV AC/ A |
| Core Diameter | φ 15 mm (0.59 in) or less |
| Operating Temperature and Humidity | 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation) |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
