Hioki MR8827 Memory HiCorder | APC Technology Group

MR8827

MR8827

Hioki

Memory HiCorder

High-speed 20MS/s 32-channel Fully-isolated Memory Recorder Provides Simultaneous Data Acquisition
Over 32 Analog + 32 Logic Channels

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, weight, acceleration and rotation due to complete isolation between channels and from each channel to the ground. More than just a digital oscilloscope, the MR8827 data acquisition (DAQ) recorder accommodates plug-and-play input modules to meet applications such as trial runs after the scheduled maintenance of railway cars to verify for voltage command signals, motor current, car speed, and brake pressure.

Key Features

  • Generate and record waveforms with a single unit
  • Output previously recorded problematic waveforms and apply to devices under test to simulate potential issues
  • 32 analogue + 32 logic channels to 28 analogue + 64 logic channels
  • High-speed sampling up to 20MS/s with fully isolated inputs
  • Safe measurement with all isolated analogue inputs
  • Large capacity memory of total 512M-words
  • Measure various system signals from high voltage to ultra low voltage simultaneously
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
Power Supply 100 V to 240 V AC, 50/60 Hz (220 VA max., when using printer: 350 VA max.)
Dimensions and Weight 401 mm (15.79 in)W × 233 mm (9.17 in)H × 388 mm (15.28 in)D (including protruding parts except handle), 12.6 kg (444.4 oz) (main unit only)
Included Accessories Instruction manual ×1, Power cord ×1, Application disk (CD-R) ×1, Input cord label ×1, Printer paper ×1 (when ordering printer unit), Roll paper attachment ×2 (when ordering printer unit)
Number of Channels 32 ch analogue + 32 ch logic, or 28 ch analogue + 64 ch logic (when use with built-in logic input + plug-in logic unit 8973 × 2)
Measurement Ranges

[Analog Unit 8966]: 5 mV/div to 20 V/div, 12 ranges, resolution : 1/100 of range (using 12-bit A/D)

[High Resolution Unit 8968]: 5 mV/div to 20 V/div, 12 ranges, resolution : 1/1600 of range (using 16-bit A/D)

Frequency Characteristics DC to 5 MHz (-3 dB, using the 8966), DC to 100 kHz (-3 dB, using the 8968)
Measurement Functions Memory (high-speed recording), Recorder (real-time recording), X-Y recorder, FFT
Memory Capacity 128M-words/ch (using 4 Analog channels) to 16M-words/ch (using 32 Analog channels), Total capacity 512MW memory
External Interfaces

LAN: 100BASE-TX, USB 2.0 series A receptacle 2 port (for USB memory, mouse)

USB 2.0 series B receptacle (for communication with PC, mass storage)

Display 10.4 inch TFT color LCD (SVGA, 800 × 600 dots)
Number of Slots 16 slots (Max. 16)
Number of Logic Channels

32 ch logic (logic probe terminal GND share a common GND with chassis) Built-in logic input not available when using DVM Unit MR8990 on slots 1, 2, 9, or 10.

[Limitation on using built-in logic input] (with logic measurement ON)

  • Measurement resolution on slots 1, 2, 9, and slot 10 is limited up to 12 bits
  • Cannot use Frequency Unit 8970 on slots 1, 2, 9, or 10
Time Axis (Memory Function) 5 µs to 5 min/div, 26 ranges, at 100 points/div resolution
Other Functions Numerical calculation, Waveform processing, Waveform judgment (at Memory, or FFT function)
Printing [Built-in A4-size printer option]: 216 mm (8.50 in) × 30 m (98.43 ft), thermal paper roll, Recording speed : Max. 50 mm (1.97 in)/s
Data Storage Medium USB memory stick, CF card, Built-in SSD unit (option, 128GB) *Approx. 125 sec. when saving 100 MB of data *Data of 100 MB in size can record 16,000 div waveforms across 32 channels.
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. Wave Processor 9335
  2. MR8740
  3. MR8870
  4. MR9322
  5. 9320-01