A622

A622 100 Amp AC DC Current probe/BNC

This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. The Tektronix A622 probe has a BNC connector and can be used with a shrouded banana plug adapter so it can also be used on digital multimeters, TekMeter, and oscilloscopes. The Tektronix A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.

• Frequency range: DC to 100 kHz
• Maximum input current: 100 A peak
• Output: 10 mV/A, 100 mV/A
• Maximum conductor diameter: 11.8 mm (0.46 in.)
• Termination: BNC¹
• Maximum bare-wire voltage: 600 V (CAT III)
• Safety: UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032