HARTING Field Wireable Connectors: Save up to 25% time and simplify the installation of ethernet networks
Harting's new intuiative connectors that are safe, fast to install and made for harsh industrial environments
The time saved by using field wireable connectors is enormous. They can be mounted on the cables in just a few moments with maximum flexibility. The best choice for the installation of Ethernet networks in industrial plants.
- No special tools needed
- Saves a lot of time
- Fast application for field wiring
- Easy and Intuitive to assemble
- Safe process, flexible, robust
- High performing
Typical application scenarios for field wireable connectors
In which situations is the use of field wireable connectors recommendable? An example: If you do not know the required length of a cable when wiring a machine, then you must carry out the installation on site, directly in the field, directly in the machine. And then your connector must offer the greatest degree of flexibility, simplicity, robustness and safety. These advantages speak for the use of field wireable connectors from HARTING.
More application examples for field wireable connectors
- Wiring is carried out without ready-made cable assemblies, but directly and flexibly from the reel
- A field device is to be quickly connected to an industrial network
- An industrial network is to be expanded quickly and at short notice
- There are wall bushings on the cable route that are too narrow for standard Ethernet connectors
- The use of special tools is to be dispensed with
RJ Industrial Multifeature
RJ 45 for industrial IP20 enviroments: Harting's new RJ Industrial Multifeature is absolutely robust and reliable with integrated cutting tools for quick, easy and tool-less assembly. This can save you up to 25 % time when installing the Ethernet infrastructure.
- Reduction of installation time by more than 25%
- For IP20 applications & top HF performance
- Integrated cutting tool
- Angled cable outlets in 90° or 35° outlet direction
- Compatible with all types of cables
preLink Ethernet Cabling System
A highly flexible system: The cable-mounted preLink® block can be easily inserted into a variety of connectors and sockets (RJ45, M12) as well as PCB receptacles. preLink is an all-purpose cabling solution for IT, building automation and industry - all enviroments from IP20 up to IP65/67.
- Pre-assembled or on-Site assembly
- All enviroments from IP20 up to IP65/67
- Fast cabling modular solution
- Absolute reliability of the installation process
- Cat.6A: 10 Gbit/s, 500 Mhz
HARAX toolless rapid termination
HARAX is a toolless rapid termination technique from HARTING. The contact is established via insulation displacement contacts. M8 / M12 circular connectors with HARAX connection can be easily assembled by hand on-site.
- Termination technique for M8 and M12
- Toolless rapid termination
- Very quick
- IP 65/67 standard for use in outdoor and humid areas
Co-Tron Components is a part of APC Technology Group.
For 34 years, Co-Tron have been a trusted distributor of Harting products, over this time they have built a strong partnership for the distribution of connectors and interconnection systems.
As well as the Field Wireable Connectors, Harting manufactures a wide selection of connectors.
For advice and technical support ask a member of our team:
0330 313 3220 | [email protected]
A global market leader in the manufacture of connectors and interconnection systems is renowned for its reliable connector solutions. HARTING’s products cover data processing, control and measurement applications within industrial machinery, food and beverage equipment, rail, automotive, energy distribution, wind power and robotics.