New from Holt Integrated Circuits Inc - Programmable 16-Channel Low-Side Driver with Built-In Protection and Load-Current Sensing
Compact high-reliability 16-channel low-side driver designed to meet the rigorous demands of avionic and defence applications.
Holt Integrated Circuits recently announced the introduction of the HI-84216, a smart 16-channel low-side driver designed for high-reliability avionics applications. The device uses a Serial Peripheral Interface (SPI) for intelligent switch control, monitoring and advanced diagnostics. The HI-84216 is capable of sinking 250mA per channel with up to 4A total sink current for parallel channel operation.
The HI-84216 includes numerous protection features such as a thermal fail-safe mechanism and overcurrent shutdown on a per-channel basis with flexible retry options. The device measures the global die temperature and output current of each channel using an integrated 8-bit A/D converter.
Both high and low current threshold limits may be programmed for over-current and open load detection respectively and both hardware and software interrupts can be enabled on a per-channel basis to allow monitoring of individual load-current status.
HI-84216 product highlights:
- Compact 16 channel low-side driver (6mm x 6mm)
- 250mA sink current per channel
- Sink up to 4A when all channels used in parallel
- Accurate current/temperature measurement
- Access diagnostics and program via 10 MHz SPI
- 0.5 Ω On-Resistance per channel
- < 1μA leakage current with low quiescent power
- Digital I/O powered with 1.8V to 5.0V
- Continuous Online Built-in Self-Test
- Host-controlled output enable pin
- Operating Temperature:
○ -40oC to +85o C or -55o C to +125o C
The integrated 8-bit A/D converter provides accurate measurement of channel current and temperature which are stored in registers as 8-bit binary words and may be read via host-initiated SPI opcodes. A fully programmable internal PWM clock generator can operate on a per channel basis across a frequency range of 24 Hz to 48 kHz, with 16-bit resolution pulse width and period.
HI-84216 16-channel low-side driver applications:
- Aerospace/Defence
- Avionics discrete output signalling
- High reliability
- LED driver/dimming
- Incandescent lamp control
- Relay and solenoid
- Small DC motor
- Valve/Actuator control
- Automation
- General low-side-switch control
Anthony Murray |Director of Marketing Communications at Holt Integrated Circuits.
The HI-84216 is available in a compact 6mm x 6mm, 48-pin plastic QFN package and comes in industrial (−40oC to +85oC) and extended (−55oC to +125oC) temperature ranges with optional burn-in at the higher temperature.
Further technical can be requested by speaking to our high-reliability components team member. Holt draws from a long history and technical expertise in military and aerospace quality and high reliability.
New Holt ADK-84216 Development Kit for HI-84216 Programmable 16-Channel Low-Side Driver
The new ADK-84216 is a development kit designed to demonstrate the features of Holt’s recently announced programmable 16-channel low-side driver, HI-84216.
The kit consists of a 2-board assembly, comprising a lower MCU board with ARM Cortex M3 16-/32-bit microprocessor and debug interface, and an upper HI-84216 daughtercard to demonstrate the key features of the device.
The project source code is included and easily customised to provide a starting point for customer application software development, shortening design cycles, reducing risk and decreasing time to market.
Key Features:
- Serial Peripheral Interface (SPI) for intelligent switch control, monitoring and advanced diagnostics
- 250mA per channel sinking capability
- 4A total sink current for parallel channel operation
- 8-bit ADC provides accurate measurement of channel current and temperature
- Internal PWM clock generator with 16-bit resolution
- External PWM clock option. PWM waveform generation
Available With Expert Insight and Support From
Official Holt Integrated Circuits Distributor
APC works close with industry-leading Aerospace and Defence manufacturers to provide you with the largest selection of radiation-tolerant components on the market, delivered faster and more cost-efficiently, giving you faster time-to-mission and reduced costs. Contact an expert today.
As AS9120B Certified Distributors, our space-compatible technologies include, but are not limited to: Radiation-Tolerant, Semiconductors, Microelectronics and Optoelectronic Components, including Integrated Circuits. APC can also supply high-density ‘System-in-Package’ Solutions that miniaturise radiation tolerant systems.
Holt Integrated Circuits is a major supplier of ICs for avionics and military aircraft data bus and display applications. The company’s products are specified by more than 400 manufacturers worldwide and are employed in flight control, navigation, engine management, communications, safety equipment, and in-flight entertainment systems.