9669
My Cart
£0.00

9669

9669

Hioki

Clamp On Sensor 9669 - For measuring load current, voltage output sensor 1000 A AC

main product photo
Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9669 is a 1000A AC clamp sensor with voltage output for measuring load current. CAT III 600V
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

Request a quote
More Information
Attribute Value
Key Features
  • For inverter devices or commercial power lines
  • Measure up to 1000 A
Basic Specifications
Rated measurement current 1000 A AC
Max. measurement current Continuous 1000 A (45 to 66 Hz)
Output rate 0.5 mV AC/ A
Amplitude accuracy
(45 to 66 Hz)		 ±1.0% rdg. ±0.01% f.s.
Phase accuracy ±1° (45 Hz to 5 kHz)
Amplitude frequency characteristics Within ±2% at 40 Hz - 5 kHz (deviation from accuracy)
Max. rated voltage to earth 600 V AC rms or less
Measurable conductor diameter φ 55 mm (2.17 in) or less
80 × 20 mm, Buss bars
Operating temperature and humidity 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dustproofness and waterproofness N/A
Dimensions and mass 99.5 mm (3.92 in)W × 188 mm (7.40 in)H × 42 mm (1.65 in)D, 590 g (20.8 oz)
Cord length 3 m (9.84 ft), Output terminal: BNC
Instrument Type Clamp Meter
Notes Supports power quality analyzers, power meters and other data acquisition equipment with voltage input
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. ST5520

    ST5520
  2. IR4018

    IR4018
  3. 3287

    3287
  4. 9675

    9675
  5. PD3259-50

    PD3259-50