9132-50
9132-50
Hioki
Clamp on Probe
Simply Connect to a Tester or Recorder to Easily Measure Large Currents
Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9132-50 is a multi-range 1000 A AC voltage output clamp sensor for capturing waveforms with DMMs and Memory HiCorders. Measure AC current on live power lines without needing to cut the wire. CAT III 600 V
Key Features
- Economical clamp sensor for waveform recording with Memory HiCorders
- Choose from up to six general-purpose ranges
Contact us for lead time
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Included Accessories | Instruction manual ×1 |
| Max Allowable Input | 1000 A rms continuous (all ranges) (For 40 Hz to 500 Hz: 100 %, and for 500 Hz to 1 kHz: within 90 % of derating) |
| Dimensions and Weight | 100 mm (3.94 in)W × 224 mm (8.82 in)H × 35 mm (1.38 in)D, 600 g (21.2 oz), cord length: 3 m (9.84 ft) |
| Basic Accuracy | ±3 % rdg. ±0.2 % f.s. (45 to 66 Hz) |
| Rated Current | 20 A to 1000 A AC, 6 ranges |
| Frequency Bandwidth | Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg. |
| Output Voltage Rate | 0.2 V AC f.s. (f.s. = setting rage) (Connect to a voltage input device providing a high input impedance of 1 MΩ) |
| Core Diameter | φ55 mm (2.17 in), or 20 mm (0.79 in) × 80 mm (3.15 in) busbar |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
