Wavecontrol Unveils New SMP3-Streamer Automotive Testing Software| APC

Revolutionise Automotive Testing with Wavecontrol's Next-Generation SMP3-Streamer Software

The measurement of ElectroMagnetic Fields for human exposure is becoming increasingly important, especially with the introduction of electric vehicles and increase of electronics devices inside. These measurements are essential to assure safety against human exposure to ElectroMagnetic Fields (EMF).

Wavecontrol, a leading innovator in automotive test solutions, has announced the launch of the all-new SMP3-Streamer software. This revolutionary tool empowers engineers to streamline and optimise the data acquisition and streaming process within automotive testing. The SMP3-Streamer represents a significant leap forward, offering unparalleled efficiency, scalability, and real-time visibility for a wide range of test applications.

As there is an increased need for electric vehicles to combat pollution and drive decarbonisation efforts, concerns have emerged regarding the potential health risks associated with electromagnetic field (EMF) exposure generated by automotive vehicles and their components.

Due to the higher currents emitted by these electrical and electronic components, drivers and passengers are increasingly exposed to significant low-frequency magnetic fields. To address these concerns, international organisations and car manufacturers have established standards to ensure compliance with EMC safety regulations.

Wavecontrol have introduced the Streamer solution to facilitate comprehensive automotive EMF testing, covering frequencies up to 400 kHz and offering various features making it the most comprehensive choice for automotive EMF testing and compliance with industry standards and regulations.

SMP3-Streamer Key Features

Magnetic Field Measurement: Covers a wide frequency range for LF automotive testing applications from 1 Hz to 400 kHz.

Simultaneous Time and Frequency Domain Measurements: Enables users to capture data in both domains simultaneously.

Predefined Setup for Standards: Offers predefined setups for different standards settings, streamlining the testing process.

Designed for Numerous Standards: Complies with various automotive standards such as IEC 62764, GB/T 37130, MBN 10284-2, TSC 7048G, and similar manufacturer standards.

Independent Limits Selection: Allows users to set independent limits for time and frequency domains.

User-Defined Exposure Limits: Allows users to define exposure limits according to specific requirements.

High Frequency Resolution: Achieves a frequency resolution of 1 Hz across the entire band. The resolution steps are also adjustable by the user.

Adjustable Resolution Bandwidth (RBW): Users can customize RBW in specific frequency bands.

Real-time FFT Measurements: Conduct FFT measurements in real-time with results stored internally, eliminating the need for an external equipment.

Speed Graph Integration: Utilizes the GPS of the SMP3 meter to generate speed graphs, enhancing data visualization.

Multiple System Compatibility: Supports simultaneous measurement with up to 7 SMP3 devices and WP-series probes.

Data Export: Easily export data to Excel and CSV reports, including sections for both time and frequency domain results. All frequency data, including maximum and minimum values, are saved in the report.

Advanced Testing Capabilities: Tailored to meet the stringent testing requirements of the automotive industry.

Flexible and Upgradable: Offers flexibility for future upgrades and enhancements to include new functions, standards settings and limits.

Cost-Effective Solution: Provides a cost-effective solution for automotive EMF testing needs. Users benefit from continuous updates at no additional cost.

Complies with Up-to-Date Automotive Test Requirements for Human Exposure

  • EC 62764-1
  • GB/T 37130
  • MBN 10284-2
  • TSC 7048G
  • JLR-EMC-CS
  • FMC 1278
  • STD 515-0003
  • JASO TP-13002
  • GS 95002
  • TL 81000

SMP3-Streamer Compatible Products

The Wavecontrol SMP3-Streamer software is specifically designed for use with the Wavecontrol SMP3 and SMP2 device and reccomended for use with WP400c probe.

Wavecontrol-SMP3-Field_Strength_Meter_for_EMF_exposureWavecontrol-SMP3-Field_Strength_Meter_for_EMF_exposure

SMP3 Field Strength Meter for EMF (Electromagnetic Field Meter) Exposure

3 Instruments in 1

  • DC Field measurements
  • Spectrum Analysis – FFT up to 10 MHz
  • Broadband measurements up to 60 GHz

The only device that offers genuine 3-in-1 functionalities: broadband measurements (DC to 60 GHz), frequency spectrum analysis (DC to 10 MHz) and static field measurements. 

The SMP3 field meter provides the most advanced features and technology on the market, designed for users who need high-quality measurements, ease of use and good reporting tools.

WP400c Field Probe

1 Hz - 400 kHz

  • Electric & Magnetic field measurement
  • Isotropic & True RMS measurement
  • Spectrum analysis probe
  • Measurements in accordance with International Standards
  • 100 cm² sensor
WP400cWP400c

 

EMF Human Exposure Monitoring Solutions

brought to you by APC Technology Group

 

APC Technology Group is an official Wavecontrol distributor for the UK and Ireland. With over 40 years' of expertise supplying RF and Microwave Components and specialist Test Solutions, our team offer a wealth of experience and knowledge.

For more information about the SMP3-Streamer, or any of Wavecontrol's EMF and personal safety devices and software, start a conversation with a member of our team.

 

0330 313 3220 | [email protected]

Specialists in electromagnetic field monitoring and assessment systems to measure electromagnetic field levels associated with workplace safety and the Physical Agents Directive (EMF) 2013/35/EU. Wavecontrol produce products that can measure fields generated by different sources such as welding systems, mobile phone base stations, radio and TV transmitters and repeaters, DECT systems and Wi-Fi systems.

Latest APC News

  1. 9 Dec 2024

    Radar Sensor Technology: Driving Precision Across Automotive, Industrial and SMART City Applications

    Read more
  2. 3 Dec 2024

    Tektronix Introduce Education Oscilloscopes to its Entry-Level Product Line

    Read more
  3. 2 Dec 2024

    Introducing MonitEM-IoT: Next Generation of Electromagnetic Fields Area Monitoring System

    Read more
  4. 7 Nov 2024

    APC Technology Group Return to Space Tech Expo Europe

    Read more
  5. 28 Oct 2024

    APC Technology Group Joins ADS Group, Expanding its Reach into the Aerospace, Defence and Security Industries

    Read more