9660
My Cart
£0.00

9660

9660

Hioki

Clamp On Sensor 9660 - For measuring load current, voltage output sensor 100 A AC

main product photo
Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9660 is a 100A AC clamp sensor with voltage output for measuring load current. CAT III 300V
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

Request a quote
More Information
Attribute Value
Key Features
  • For inverter devices or commercial power lines
  • Fits in narrow spaces due to compact design
Basic Specifications
Rated measurement current 100 A AC
Max. measurement current Continuous 130 A (45 to 66 Hz)
Output rate 1 mV AC/ A
Amplitude accuracy (45 to 66 Hz) ±0.3 % rdg. ±0.02 % f.s.
Phase accuracy ±1° (45 Hz to 5 kHz)
Amplitude frequency characteristics Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy)
Max. rated voltage to earth 300 V AC rms or less
Measurable conductor diameter φ 15 mm (0.59 in) or less
Operating temperature and humidity 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dustproofness and waterproofness N/A
Dimensions and mass 46 mm (1.81 in)W × 135 mm (5.31 in)H × 21 mm (0.83 in)D, 230 g (8.1 oz)
Cord length 3 m (9.84 ft), Output terminal: BNC
Instrument Type Clamp Meter
Notes Supports power quality analyzers, power meters and other data acquisition equipment with voltage input
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. CT6862-05

    CT6862-05
  2. CM4141-50

    CM4141-50
  3. FT3151

    FT3151
  4. ST5540

    ST5540
  5. 3287

    3287