Hioki P9000 Differential Probe | APC Technology Group

P9000

P9000

Hioki

Differential Probe

Easily Connect to Hioki Memory HiCorders and HiLoggers for High Voltage Testing

Key Features

  • Compact probe for CAT III 1000 V environments
  • Wave mode: Observe instantaneous waveforms
  • RMS mode: Observe RMS value waveforms
  • Principal areas of use:
    • High-voltage battery circuits in EVs, HEVs, and other automobiles
    • High-voltage circuits in energy-related equipment such photovoltaic cells
    • Commercial power line circuits (480 V rms, etc.)
    • High-voltage surge noise from inverters, motors, solenoids, etc.
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

More Information
Attribute Value
Power Supply

(1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only)

(2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA
To prevent an electric shock, when supplying power from the USB-microB terminal, please supply from a device which USB's GND terminal of the source device is grounded.

(3) External power supply (2.7 V to 15 V DC)

Dimensions and Weight 128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz), Cord length: Input: 70 cm (2.30 ft) ; output: 1.5 m (4.92 ft)
Included Accessories Instruction manual ×1, alligator clips ×2, carrying case ×1
Max Allowable Input 1000 V AC/DC
Max Rated Voltage to Earth 1000 V AC/DC (CAT III)
Measurement Functions

P9000-01
Waveform monitor output only
Frequency characteristics: DC to 100 kHz, -3 dB

P9000-02
Waveform monitor output/AC RMS value output (switchable)
Wave mode frequency characteristics: DC to 100 kHz, -3 dB
RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling)

Operating Temperature -40˚C (-40˚F) to 80˚C (176˚F)
Division Ratio 1000:1 or 100:1 (user selectable)
DC Amplitude Accuracy ±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1)
RMS Amplitude Accuracy

P9000-01
N/A

P9000-02
±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave), ±3% f.s. (1 kHz to 10 kHz, sine wave)

Input Resistance Capacity Between H and L: 10.5 MΩ, 5 pF or less (at 100 kHz)
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. MR8880
  2. MR8827
  3. MR6000
  4. SP7001/SP7002
  5. MR8741