IM3570
IM3570
Hioki
Impedance Analyser
Single Device Solution for High Speed Testing and Frequency Sweeping
Hioki LCR Meters and Impedance Analysers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3570 is ideal for use in applications requiring low-ESR measurement on the order of several milliohms, for example testing of functional polymer capacitors, due to its superior low-impedance repeatability.
Key Features
- Continuous LCR/DCR/sweep measurements and high-speed testing achieved with one instrument
- High-speed testing, achieving maximum speeds of 1.5ms (1 kHz) and 0.5ms (100kHz) in LCR mode
- High-accuracy measurements, basic accuracy of Z parameter: ±0.08%
- Perfect impedance analyser for testing the resonance characteristics of piezoelectric elements, C-D and low ESR measurement of functional polymer capacitors, DCR and L-Q measurement of inductors (coils and transformers)
- Perform frequency sweeps, level sweeps, and time interval measurements in analyser mode
Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.
| Attribute | Value |
|---|---|
| Power Supply | 90 to 264 V AC, 50/60 Hz, 150 VA max. |
| Included Accessories | Power cord × 1, Instruction manual × 1, PC communication instruction manual (CD-R) × 1 |
| Display | 5.7-inch color TFT, display can be set to ON/OFF |
| Measurable Range | 100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z) |
| Functions | DC bias measurement, Comparator, BIN measurement (classification), Panel loading/saving, Memory function |
| Dimensions and Weight | 330 mm (12.99 in) W × 119 mm (4.69 in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz) |
| Basic Accuracy | Z ±0.08% rdg. θ: ±0.05° |
| Measurement Parameters | Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q |
| Measurement Speed | 0.5 ms (100 kHz, FAST, display OFF, representative value) |
| Measurement Modes | LCR mode, Analyser mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode |
| Display Range |
Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : |
| Measurement Frequency | 4 Hz to 5 MHz (5 digits setting resolution, minimum resolution 10 mHz) |
| Measurement Signal Level |
Normal mode: CC mode: Low impedance high accuracy mode: |
| Output Impedance | Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω |
| Attribute | Value |
|---|---|
| Data Sheet | Click here to view |
