9661
My Cart
£0.00

9661

9661

Hioki

Clamp On Sensor 9661 - For measuring load current, voltage output sensor 500 A AC

main product photo
Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9661 is a 500 A AC clamp sensor with voltage output for measuring load current. CAT III 600 V
Contact us for lead time

Click below to request a quote for this item. Or for product advice, stock and lead time enquiries call our team on 0330 313 3220.

Request a quote
More Information
Attribute Value
Key Features
  • For inverter devices or commercial power lines
  • Measure up to 500 A
Basic Specifications
Rated measurement current 500 A AC
Max. measurement current Continuous 550 A (45 to 66 Hz)
Output rate 1 mV AC/ A
Amplitude accuracy
(45 to 66 Hz)		 ±0.3% rdg. ±0.01% f.s.
Phase accuracy ±0.5° (45 Hz to 5 kHz)
Amplitude frequency characteristics Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy)
Max. rated voltage to earth 600 V AC rms or less
Measurable conductor diameter φ 46 mm (1.81 in) or less
Operating temperature and humidity 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dustproofness and waterproofness N/A
Dimensions and mass 78 mm (3.07 in)W × 152 mm (5.98 in)H × 42 mm (1.65 in)D, 380 g (13.4 oz)
Cord length 3 m (9.84 ft), Output terminal: BNC
Instrument Type Clamp Meter
Notes Supports power quality analyzers, power meters and other data acquisition equipment with voltage input.
More Information
Attribute Value
Data Sheet Click here to view

Related Products

  1. CT6280

    CT6280
  2. CT7631

    CT7631
  3. IR4018

    IR4018
  4. 3490

    3490
  5. 3153

    3153